HOME

 
PLANERS / MOLDERS

  

Powermatic PM15 15" Planer/Molder stock#1120003

Strong 5HP motor powers through big jobs
15" planing capacity is wide enough to run double molding knife sets
Large cast iron table is supported by four lead screws and has chain and sprocket height controi for precise depth of cut positioning
Feed rollers and cutterhead supported by sturdy cast iron head assembly
Runs two feed speeds, providing maximum stock removal at the higher speed and a fine milled finish for decorative moldings at the lower speed
Uses single or three-piece molding knives, providing a wide selection of profiles
Large handwheel and easy-to-read inch/metric scale for fast set-up
Hinged top for fast, easy tooling changes
Fully enclosed base cabinet with integral casters provides complete mobility
Urethane infeed and outfeed rollers
Includes dust hood with 4" chute
STANDARD EQUIPMENT
Motor with magnetic controls Four casters Dust hood Knife set Knife gauge


 

STANDARD EQUIPMENT:
3HP TEFC motor with magnetic controls, Spiral cutterhead with three flexible steel knives, 4" dust port, Extension tables, Closed stand with built-in casters, Digital readout

Powermatic 15S Deluxe Planer
Stock# 1791210

. Spiral cutterhead and knives provide smoother cutting and a finer finish than conventional knives
. Powerful 3HP TEFC motor controlled with a magnetic switch
. Three V-belts transfer maximum power to the cutterhead
. Large cast iron handwheel moves cutterhead quickly and easily
. Digital readout ensures accurate table positioning
. Large precision-ground cast iron table and extension wings provide maximum workpiece support while planing
. Serrated steel infeed roller and smooth steel outfeed roller allow for 1/8" maximum depth of cut and trouble free operation
. Two-speed gearbox features automatic chain tensioner
. One-piece welded steel stand has built-in lockable casters
. Steel top-mounted return rollers speed repetitive cuts
. Angled dust chute with 4" port positions collection hose away from the work area while providing efficient chip and dust collection
. Head locks firmly in place, preventing movement while in use


 

Powermatic 209 20" Planer
Stock#1791296 1PH 230V
Stock# 1791297 3PH 230/460V

5 HP Motor, 20" planing capacity
Fully enclosed base cabinet with integrated casters
Big 55-1/2" x 20" cast iron table and extension table supported by 4 columns
4 feed speeds 16-20 FPM, 24-31 FPM
Feed rollers and cutterhead supported by full cast iron head assembly

Maximum cutting width (in.) 20
Maximum thickness (in.) 8
Full width of depth of cut (in.) 3/32
Minimum planing lenth (in.) 6-3/4
Number of knives 4
Cutterhead speed (RPM) 5,000
Cuts per minute 20,000
Cutterhead diameter (in.) 3-3/16
Blade size (L x W x T/in.) 20 x 1 x 1/8
Feed rate (FPM) 24 and 31
Dust port diameter (in.) 5
Dust collection minimum CFM required 900
Overall dimensions (L x W x H/in.) 26 x 36-5/8 x 41-3/8
Shipping/Net weight (lbs.) 880/770



 

The model 201 is available with 7-1 /2 horsepower, 3-phase 230 or 460 volt or 7-1 /2 horsepower, single-phase motors. This planer is perfect for the small to medium shop with continuous planing requirements.

Powermatic 201 22" Planer
Stock# 1791261 1PH 230V
Stock# 1791262 3PH 230V
Stock# 1791280 3PH 460V

This 1,300 lb. heavy-duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives. The hood comes standard with a 5" dust port for easy attachment to any dust collection system. The cutterhead is complete with four high speed steel knives and turns at 4,800 rpm producing 19,200 cuts per minute. The anti-kick back fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish.

The well designed infeed and outfeed rollers are fitted with roller bearings for long roller life. The sectional infeed and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed roller facilitates both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding.

The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. You may easily raise the massive ribbed cast iron, ground finished table 1 /16" with each turn of the hand wheel.


 




 




Delta Model# 22-580 13" Finishing Planer

Delta Industrial Model 22-580 13" Two-Speed Finishing Planer with a 15 amp., 120V motor, two-knife cutterhead with index pins, cutterhead wrench, blade magnet and instruction manual.
Two-speed material feed rate system: dimensioning speed (60 CPI) to quickly reach desired thickness; finishing speed (90 CPI) for an ultra smooth surface on final pass.
Patented cutterhead lock stabilizes cutterhead to virtually eliminate snipe.
High-speed, double-sided knives.
Full-range depth stop for repeatable thicknesses at any dimension across the entire height range.
Blade zero indicator sets the cutterhead to the exact thickness of the material.
Oversized cutterhead height handle with indexing ring.
Cutterhead wrench and blade magnet to minimize blade contact.





 



Standard-equipment knife-setting gage is included for accurately setting the three-knife cutterhead. The chip breakers and pressure bar may be lifted for making blade changing even easier.
Massive gear box uses large chain drive to power the sectional serrated steel infeed roller and large polyurethane outfeed roller for maintaining a positive feed.
Sectional serrated steel infeed roll with sectional chip breakers for planing uneven stock.
Hinged side panel access doors make it easy to change feed rate speed from 20 to 30 feet per minute.
Hinged dust hood features a built-in, 6" diameter dust chute.


Delta DC-580 20" Planer #22-450 3PH, #22-451 1PH

Delta Indusrial Model 22-450 DC-580 20" Planer with a 3-phase, 5HP motor with magnetic motor starter and automatic reset overload protection; 3-knife cutterhead, sectional serrated infeed roll, double bed rolls and polyurethane outfeed roll, sectional chipbreakers, dust chute, knife-setting gage, and wrench.
Delta Industrial Model No.22-451 DC-580 20" Planer. Same as above except with a single-phase, 5HP motor with magnetic motor starter and automatic reset overload protection.
Up-front controls include a handy lever for instantly engaging and disengaging feed rolls and push-button on/off switch.
Double V-belt drive runs the 3 1/8" diameter 3-knife cutterhead, producing 15,000 cuts per minute.
Large 22" X 28" precision-ground table contains two adjustable bed rollers for smooth feeding of uneven stock.
Large-diameter, micro-adjustable bed roll lever easily raises and lowers bed rolls for quick set-ups. Conveniently placed to the right, a large handwheel with locking knob adjusts table height. Also note the easy-to-read English/Metric depth-of-cut scale on tn frames.
Two sealed lead screws with adjustable gibs, keepthe table true when making height adjustment.





 


SPECIFICATIONS:
Motor: 2 HP, 110V, 15A universal
Table size with ext. tables: 39" x 13"
Footprint: 25" x 16-11/16"
Overall width: 25"
Height: 20"
Knives: 2-HSS double edged indexed
Cutterhead speed: 10,500 RPM
Cutterhead diameter: 1-7/8"
Max depth of cut: 1/16" (full width), 1/8" (5"board)
Max width of cut: 13"
Cuts per minute: 21,000
Feed rate: 26 FPM
Maximum stock height: 6"
Minimum stock length: 6"
Four column support
Head locks in place
Safety switch
Base: aluminum
Infeed/outfeed rollers: rubber
Power transfer: belt
Adjustable depth stop
Cutting depth gauge



ShopFox 13" Heavy Duty Planer #W1675

The Model W1675 is a great portable planer with many features and packs an impressive punch for its size. Unlike most planers of similar size, the Model W1675 takes stock to a maximum width of 13" which further expands your planing capabilities. Its rugged 2 H.P. motor lets you plow through some of the toughest wood. And the top-mounted depth adjustment wheel makes setting the cutting depth quick and easy. This planer uses double-edged quick-change blades, so when one side gets dull, you can just turn them over and keep on planing. These are just a few reasons why this is one of the best portable planers available.






 


Features:
Two chromed return rollers
Extra-large handwheel
Minimum stock height: 1/4"
Minimum stock length: 8"
Chrome extension legs with one adjustable roller
Two positive table locks
Magnetic switch with thermal overload protector
One-piece cabinet style stand
Infeed rollers: Spiral-serrated
Outfeed rollers: Machined
Power transfer: Triple belt drive
Two adjustable bed rollers
Knife setting jig included
Anti-kickback design
Powder-coated paint
Built-in 4" dust port


ShopFox W1692 15" Planer with Cabinet Stand

The most popular planer size is now offered with all the features woodworkers demand including a one-piece stand, pedestal-mounted magnetic switch control, top-mounted return rollers, four-column support, extension beds and rollers, adjustable bed rollers, large handwheel, two-speed gear box and triple belt drive. This is the planer woodworkers dream about.

Specifications:
Motor: 3 HP, 220V, single-phase, 18 Amp
Table size with extension tables: 15-5/8" x 14"
Footprint: 21-1/2" x 21"
Overall width: 32"
Height: 42"
Knives: 3 HSS
Cutterhead speed: 5,000 RPM
Cutterhead diameter: 3"
Maximum depth of cut: 1/8"
Maximum width of cut: 14-7/8"
Maximum height of cut: 6-1/8"
Cuts per minute: 15,000
Feed rate: 16 FPM and 20 FPM
Maximum 78 cuts per inch






 


Features:
Two adjustable extension tables each with three chromed rollers
Two positive head locks
Magnetic switch with thermal overload protector
Infeed roller: Spiral-serrated
Outfeed roller: Machined
Roller extension tables: 3 adjustable rollers
Cutterhead: 3 HSS blades with springs and jackscrews included
Open stand included
Angled 4" dust port


ShopFox W1723 15" Planer with Stationary Table and Open Stand

These 15" Shop Fox® planers are full of features and still offer the best value for the dollar. Both planers have stationary tables, so each time you adjust the depth of cut, there's no need to reset independent roller stands or tables. Magnetic switches and three horsepower induction motors provide plenty of power for all your planing requirements up to 14-7/8" wide and 6-1/8" thick. W1723 has a traditional three-knife cutterhead and W1724 has a spiral cutterhead for no knife mark finishes.

Specifications:
Motor: 3 HP, 220V, single-phase, 18 Amp
Table size: 14-7/8" x 20"
Height w/stand: 52-1/2"
Footprint: 25" x 25"
Overall width: 28"
Overall length: 48"
Cutterhead diameter: 3"
Number of knives: 3 HSS
Cuts per minute: 15,000
Cuts per inch: 63 & 78
Maximum depth of cut: 1/8"
Maximum width of cut: 14-7/8"
Maximum cutting height: 6-1/8"
Minimum stock thickness: 3/16"
Minimum stock length: 8"
Cutterhead speed: 5000 RPM






 


Features:
Two adjustable extension tables each with three chromed rollers
Two positive head locks
Magnetic switch with thermal overload protector
Infeed roller: Spiral-serrated
Outfeed roller: Machined
Roller extension tables: 3 adjustable rollers
Cutterhead: Spiral, 3 indexed helical HSS blades
Cabinet style stand
Angled 4" dust port


ShopFox W1724 15" Planer with Stationary Table and Closed Stand

These 15" Shop Fox® planers are full of features and still offer the best value for the dollar. Both planers have stationary tables, so each time you adjust the depth of cut, there's no need to reset independent roller stands or tables. Magnetic switches and three horsepower induction motors provide plenty of power for all your planing requirements up to 14-7/8" wide and 6-1/8" thick. W1723 has a traditional three-knife cutterhead and W1724 has a spiral cutterhead for no knife mark finishes.

Specifications:
Motor: 3 HP, 220V, single-phase, 18 Amp
Table size: 14-7/8" x 20"
Height w/stand: 50-1/2"
Footprint: 25" x 25"
Overall width: 28"
Overall length: 48"
Cutterhead diameter: 3"
Number of knives: 3
Cuts per minute: 15,000
Cuts per inch: 63 " 78
Maximum depth of cut: 1/8"
Maximum width of cut: 14-7/8"
Maximum cutting height: 6-1/8"
Minimum stock thickness: 3/16"
Minimum stock length: 8"
Cutterhead speed: 5000 RPM






 


Features:
Heavy-Duty Cast-iron Construction
Magnetic Safety Switch
Powder-coated Paint
Permanently Lubricated & Shielded Bearings
3 Chromed Infeed and Outfeed rollers
2 Chromed upper rollers
Feed Rates: 18 & 23 F.P.M.
Anti-Kickback design
Heavy Cast-iron Balanced Handwheel
Precision ground table for accuracy


ShopFox W1683 5HP 20" Planer

Prepare yourself for the heavyweight champion of planers! This workhorse has all the features anyone would need plus a few extra for enjoyment and ease of use. With a large 20" capacity and built for rugged use, this machine is the last planer you should ever need.

Specifications:
Motor: 5 H.P., Single-Phase, 220V
Cutterhead Speed: 5,500 R.P.M.
Cutting Width: 20"
Cutting Height: 8-5/8"
Max. Depth of Cut: 1/8"
Table Size: 25-3/4" x 20"
Cutterhead Diameter: 3-1/4"
4 H.S.S. Knives






 


(Same as W1683 above only with spiral cutter head)

Features:
Smooth-cutting spiral cutterhead
Heavy-duty cast-iron construction
Powerful 5 HP TEFC motor
Permanently lubricated & shielded bearings
3 Chromed infeed and outfeed rollers
Anti-kickback design
Heavy cast-iron balanced handwheel
Precision ground table for accuracy
Magnetic safety switch
Rubber outfeed roller
Powder-coated paint
2 Chromed upper rollers
Feed rates: 18 & 23 FPM


ShopFox W1718 5HP 20" Spiral Cutter Head Planer

Prepare yourself for the heavyweight champion of planers! This workhorse has all the features anyone would need, plus a few extra for ease of use. Constant wood contact with the blades on this spiral cutterhead planer produces a surface that is unsurpassed and very nearly ready for finishing. An additional benefit of the spiral cutterhead is its amazingly quiet operating volume. With a large 20" capacity and rugged construction, this machine is the last planer you should ever need.

Specifications:
Motor: 5 HP, single-phase, 220V, 28 Amps
Cutterhead speed: 5,500 RPM
Cutting width: 20"
Cutting height: 8"
Max. depth of cut: 1/8"
Table size: 25-3/4" x 20"
Cutterhead diameter: 3-3/16"
Knives: 4 rows, spiral knife configuration, total of 90 knives
Dust port: 5"
Footprint: 27-1/2" wide x 22-1/2" deep






 





ShopFox W1693 Mini Planer/Moulder

Our open-sided Mini Planer/Moulder allows plenty of flexibility for profiling mouldings and panels. Feed rollers provide consistent performance and easy access knife changing makes this machine a pleasure to own and operate. Choose from a full selection of moulding knives to fit any profile need. Includes sturdy work stand with infeed/outfeed rollers and segmented belt for smooth operation.

Specifications:
Motor: 2 HP, single-phase, 220V, 12 amps
Cutterhead speed: 7,000 RPM
Feed rate: 15 FPM
Maximum profile depth: 3/4"
Maximum profile width: 6-3/4"
Planing width: 7"
Minimum stock length: 9"
Minimum stock thickness: 1/4"
Maximum stock thickness: 8"
Height of bed: 31"
Overall size: 33"L x 20"W x 45"H






 
 


 
Brian's Tool Sales
Woodworking Tool Specialists
Enfield Industrial Condominiums
9 Moody Road, Unit 7
Enfield, CT 06082
Phone and Fax (860-763-2084
Phone:  860-763-1730
 

 

 

 

 

 

 

 

 

 

Hosted by TechsChoice.com